EDL21 Electricity meter LoRaWAN Bridge
Firmware
Downloads:
WARNING
When upgrading from Versions <0.4.1 to 0.4.1 or higher:
Due to changes in the generation of the LoRaWAN parameters the default values for JoinEUI
and AppKey
will change if you
use the Restore Default
function in the Lobaro Maintenance Tool
in order to reset the configuration.
-
app-edl21-opto-0.4.2.hex New Opto-Head Version (round) [current release]
-
app-edl21-opto-0.2.0+LoRa.hex Old Opto-Head Version (square)
Firmware Release Notifications
We normally send e-mail notifications upon release of new firmware versions. To receive this mails you can sign up to the Lobaro newsletter here.
Subscribe to our email newsletter here
Make sure to select the "Firmware Updates" checkbox!
Changelog
Firmware: app-edl21-opto
0.4.2 - 2020-10-07 - [current release]
- Built with LoRaWAN-Stack we certified in different Hardware (fixes some edge case issues).
0.4.1
- Fixed remote append
- WARNING: Due to changes in the generation of the LoRa paramters the values for JoinEUI and AppKey will change if you
use the
Restore Default
function in the Lobaro Maintenance Tool in order to reset the configuration.
0.4.0
- Added remote config via downlink
0.3.2
- Added initial readout before OTAA join to check optical connection
0.3.1
- Initial release for new round Opto-Head
Legacy Downloads:
- app-edl21-opto-0.4.1+LoRa.hex New Opto-Head Version (round)
- app-edl21-opto-0.3.2+LoRa.hex New Opto-Head Version (round)
- app-edl21-opto-0.3.1+LoRa.hex New Opto-Head Version (round)